Đặt banner 324 x 100

How To Descale And Clean A Keurig (Vinegar Vs Solution)

Your Keurig coffee maker isn’t working right. Maybe your coffee is weak, cold, or has an off-taste. Sounds like it’s time to learn how to clean and descale your Keurig. Luckily, using this guide, the process couldn’t be easier. A few quick steps and some handy pro tips, and you’ll have your favorite Keurig coffee back in no time.

Tools and Materials Needed:

– Dish soap
– Clean cloths
– White vinegar or Keurig descaling solution
– Clean, fresh water
– Large mug

Step 1: Clean the Coffee Maker

1. Unplug the Machine: Always start by unplugging your Keurig to ensure safety.

2. Remove the Water Filter: If your Keurig has a water filter, remove it. This filter should be changed every 2 to 3 months.

3. Wash Removable Parts: Wash all removable parts of the coffee maker in warm soapy water. This includes the drip tray, water reservoir and lid, and the K-cup holder. Rinse thoroughly to remove all soap residue.

4. Clean the Piercing Needle: Use the special Keurig tool to clean the piercing needle. This prevents any blockages that could affect the brewing process.

5. Wipe the Exterior: Use a damp cloth to wipe down the machine’s exterior, removing any dust or coffee splatters.

6. Reassemble the Machine: After everything is clean and dry, reassemble the machine, leaving out the water filter for now.

Step 2: Descale the Keurig

Descaling is crucial to remove mineral build-up that can affect the taste and performance of your coffee maker. It’s recommended to descale every 3 to 6 months, or more frequently if you have hard water.

Using Keurig Descaling Solution:

1. Prepare the Solution: Pour the entire bottle of descaling solution into the water reservoir, then add an equal amount of clean, fresh water.

2. Run Brew Cycles: Place a large mug under the spout and run a brew cycle. Discard the hot water. Repeat the process until the reservoir is empty.

3. Let it Sit: Let the brewer stand for 30 minutes with the power on.

4. Rinse the Reservoir: Remove the water reservoir and rinse it thoroughly, up to 10 times, to ensure no descaling solution remains. Reinstall the water reservoir and the water filter if you have one, and let them air dry.

Thông tin liên hệ

: duysoranguyen