Đặt banner 324 x 100

Open‐Cell vs. Closed‐Cell Spray Foam: Which Does Your Edmonton Home Need?


Quick answer: Choose closed-cell foam for basements, rim joists, crawl spaces, garage ceilings, and anywhere moisture or cold concrete is a concern. Choose open-cell foam for attics, roof decks, and interior walls where you want an air seal, sound control, and a lower price. The difference comes down to density, R-value, and moisture behaviour. If you’re comparing spray foam insulation options for an Edmonton home, many projects use both types in different parts of the house.

What Is the Difference Between Open-Cell and Closed-Cell Spray Foam?

Both are polyurethane foams that are sprayed as a liquid and expand as they cure. The difference is the cell structure.

  • Open-cell foam has tiny cells that are broken open and filled with air. It is light, soft, and spongy.
  • Closed-cell foam has tightly packed cells filled with gas. It is dense, rigid, and strong.

That one structural difference drives everything else: R-value, moisture resistance, strength, cost, and where each type belongs.

Open-Cell vs. Closed-Cell Spray Foam: Side-by-Side Comparison

Feature Open-Cell Closed-Cell
R-value per inch About R-3.6 About R-6 to R-7
Density About 0.5 lb/ft³ About 2 lb/ft³
Expansion on application Expands a great deal (roughly 100×) Expands less (roughly 30–40×)
Air barrier Yes, at adequate thickness Yes, even at about 1 inch
Vapour permeability Permeable Low, a vapour retarder at about 2 inches
Water resistance Absorbs water Resists bulk water
Structural strength Minimal Adds rigidity to walls and roofs
Sound absorption Excellent Moderate
Typical installed cost (CAD estimate) $1.00–$1.75 / board foot $1.75–$3.25 / board foot

How Does R-Value Compare?

Closed-cell foam gives nearly double the R-value per inch. That makes it the better choice when space is limited, such as in a 2×4 wall, a basement wall, or a rim joist.

Open-cell foam needs more thickness for the same R-value. To reach R-20, you’d need about 5.5 inches of open-cell versus about 3 inches of closed-cell. Where there’s room, such as a deep roof rafter cavity, open-cell reaches the target at a lower price.

For a cold city like Edmonton, thickness targets matter. Check the R-values required for your project and ask your contractor to show the thickness they plan to spray in each area.

Which Foam Handles Moisture Better in Edmonton Homes?

Closed-cell wins on moisture. It resists liquid water and slows vapour movement, so it suits places where dampness is likely:

  • Basement walls against concrete
  • Rim joists, where warm indoor air meets cold wood and concrete
  • Crawl spaces
  • Foundation perimeters

Open-cell is vapour-permeable. That can be an advantage. In the right assembly, moisture can dry out instead of getting trapped. It also absorbs water if it gets wet, so it should not go in areas with bulk water exposure.

Edmonton consideration: In cold climates, warm indoor air can carry moisture toward cold surfaces. Using open-cell on an unvented roof deck can create condensation risk if the assembly isn’t designed properly. Many contractors add a vapour control layer or use closed-cell. Confirm the design with your installer and local building requirements.

Which Is Better for Air Sealing?

Both types act as air barriers when applied at proper thickness.

  • Closed-cell seals at about 1 inch.
  • Open-cell usually needs more depth, often around 3.5 inches or more, to form a reliable air barrier.

Air leakage is one of the biggest sources of winter heat loss. Either foam will stop it far better than fiberglass batts, which leave gaps around framing and wiring.

Where Should You Use Each Type? A Guide by Area

Area Recommended Foam Why
Basement walls Closed-cell Moisture resistance, high R-value in thin layers
Rim joists Closed-cell Moisture and air sealing in a leaky zone
Crawl spaces Closed-cell Humidity control
Attached garage ceiling Closed-cell Cold floor above, limited depth
Attic roof deck (unvented) Open-cell or closed-cell, depending on design Open-cell saves cost; closed-cell adds moisture control
Attic floor Often blown-in; foam optional Cost-effective depth
Interior walls and soundproofing Open-cell Sound absorption, lower cost
Exterior walls (new build or reno) Either, or a hybrid Depends on wall design
Shops, barns, metal buildings Closed-cell Condensation control on steel

Can You Use Both Types in the Same Home?

Yes, and it’s common. A typical Edmonton project might combine:

  • Closed-cell in the basement and at the rim joists for moisture control
  • Open-cell in the attic roof deck for cost and sound control
  • A thin layer of closed-cell with fiberglass batts (“flash and batt”) in walls to balance cost and performance

Matching the foam to each area gets better performance than using one product everywhere, and it can keep the budget under control.

Which Costs More, and Is It Worth It?

Closed-cell costs roughly 50–100% more per board foot. The premium covers higher R-value per inch, moisture resistance, and added strength.

  • Choose closed-cell when moisture, limited space, or structural strength matter.
  • Choose open-cell when there’s depth to fill, moisture risk is low, and you want a lower price or sound control.

Think of the extra cost as paying for performance in problem areas, not as a default upgrade for every surface. For a full price breakdown, see our cost guide in [article #1 link].

What About Safety, Off-Gassing, and Environmental Impact?

  • Both types need professional installation, and occupants should stay out of the work area until the manufacturer’s re-entry time passes.
  • Cured foam is generally considered stable and inert when mixed and installed correctly.
  • Blowing agents differ. Open-cell foam is typically water-blown. Closed-cell foam has historically used agents with a higher global warming potential, though newer low-GWP formulations are now available. Ask your contractor which product they use.
  • Fire: Both are combustible, so many applications require a thermal or ignition barrier such as drywall or an approved coating.

Common Myths About Open-Cell and Closed-Cell Foam

“Closed-cell is always better.”
Not always. It costs more, and in a deep attic rafter cavity open-cell can deliver the needed R-value for less.

“Open-cell traps moisture.”
Open-cell is vapour-permeable, so it can let moisture dry out. It does absorb liquid water, so it doesn’t belong where leaks or flooding are likely.

“Foam makes a house too airtight.”
A tighter home needs good mechanical ventilation, which most modern builds already include. It’s a design matter, not a reason to avoid foam.

“One type works for the whole house.”
Rarely the best option. Matching foam to each area gives the best return.

How to Choose: Quick Decision Checklist

Ask these questions about each space:

  1. Is moisture or cold concrete involved? → Closed-cell
  2. Is the cavity shallow? → Closed-cell for higher R per inch
  3. Is the cavity deep and dry? → Open-cell may do the job for less
  4. Is noise reduction a priority? → Open-cell
  5. Does the area need structural stiffness? → Closed-cell
  6. Is the budget tight? → Open-cell where it’s appropriate, closed-cell only where it’s needed

FAQs

Which is better, open-cell or closed-cell spray foam?
Neither wins everywhere. Closed-cell suits moisture-prone and tight spaces, and open-cell suits dry, roomy cavities where cost and sound matter.

What R-value does each type provide?
Open-cell is about R-3.6 per inch. Closed-cell is about R-6 to R-7 per inch.

Is closed-cell foam waterproof?
It resists liquid water and is not damaged by occasional wetting, but it should not be treated as a substitute for waterproofing or leak repair.

Can open-cell foam be used in a basement?
Generally not recommended against concrete or in damp areas. Closed-cell is the safer choice there.

Can I mix the two in one house?
Yes. Many contractors do, choosing the foam that fits each area.

How long do both types last?
Properly installed foam can last for decades in either form.

Let a Specialist Match the Foam to Your Home

Choosing between open-cell and closed-cell depends on your assembly, your budget, and Edmonton’s conditions. The team at Classic Spray Foam can assess each area of your home and recommend the right foam for each one.

???? Request a quote from Classic Spray Foam